Key firmware máy in Epson Artisan 1430

Key firmware Máy In Màu Epson Artisan 1430

– Một số key firmware miễn phí cho máy in Epson Artisan 1430: 3D22D8F2AA142D8Z, 3A84ZZE858E13167, 3Z38D24F1Z89Z991, 3DC7CZ5812CEZ5EC, 338829CCA9ZZF539.
– Driver của máy in Epson Artisan 1430 tự động update lên firmware mới nhất, làm cho máy in không nhận dược hộp mực nữa, báo đèn đỏ và không cho in.
– Bài viết này hướng dẫn cách hạ firmware version hay còn gọi Downgrade firmware cho máy in màu Epson Artisan 1430. Sửa máy in Epson Artisan 1430 báo bị lỗi không nhận hộp mực ngoài: Epson Artisan 1430 Incompatible Ink Cartridge, ink cartridges are not recognized, ink cartridge is not recognized.

– Sau khi Downgrade Firmware cho máy in màu Epson Artisan 1430 thì máy in có thể nhận dạng được hộp mực hoặc chúng ta có thể lắp hộp mực tương thích cho máy in Epson Artisan 1430.

Phần mềm Downgrade Firmware Epson Artisan 1430

– Tải miễn phí phần mềm Downgrade Firmware Epson Artisan 1430 cho Windows:
– Tải miễn phí phần mềm Downgrade Firmware Epson Artisan 1430 cho MAC OS:

Liên Hệ Để Lấy Key Downgrade Firmware Epson Artisan 1430

Mobile/ Zalo: 0915.589.236 – 0965.806.235
Telegram: https://t.me/nguyendangmien
Skype: nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien

– Xem thêm :reset hộp mực 107a
– Phần mềm reset hp 178FNW

Tại sao hạ firmware version cho máy in Epson Artisan 1430?

– Hãng Epson tự động update firmware lên bản mới nhất để hạn chế người dùng sử dụng hộp mực tương thích, hay còn gọi là hộp mực ngoài với giá rẻ.
– Khi máy in Epson Artisan 1430 được update lên firmware mới thì chỉ nhận được hộp mực chính hãng mà không nhận được hộp mực ngoài (compatible ink cartridge). Nếu chúng ta cố gắng lắp hộp mực compatible ink cartridge vào trong máy in Artisan 1430 thì máy in sẽ cảnh báo không nhận hộp mực và đưa ra các thông báo lỗi: Epson Artisan 1430 Incompatible Ink Cartridge, ink cartridges are not recognized, ink cartridge is not recognized.
– Có 2 giải pháp để khắc phục tình trạng máy in Epson Artisan 1430 lỗi không nhận hộp mực:

1. Thay thế original ink cartridge (hộp mực in chính hãng) mới:

– Giải pháp này cực kỳ tốn kém, bởi vì ink cartridge rất đắt và mỗi khi hết mực chúng ta lại phải thay thế ink cartridge mới.

2. Hạ firmware version xuống để chạy được hộp mực ngoài:

– Giải pháp này được xem là giải pháp tối ưu nhất, tiết kiệm nhất và cũng rất dễ sử dụng.

Hạ firmware version cho Máy In Epson Artisan 1430 Chúng Ta Được Lợi Gì?

– Hạ firmware version máy in Epson Artisan 1430 sẽ xóa hết lỗi không nhận hộp mực, do vậy mà chúng ta có thể lắp được hộp mực tương thích.
– Sau khi hạ firmware version cho máy in Epson Artisan 1430 thì chúng ta có thể cài đặt trên bất kỳ máy tính nào mà không sợ bị lỗi không nhận hộp mực nữa.
– Chúng ta có thể xem hướng hạ firmware version cho máy in màu Epson Artisan 1430 chỉ với vài bước đơn giản dưới đây.

Cách hạ firmware version máy in Epson Artisan 1430

– Rút toàn bộ kết nối USB tới máy tính ra ngoại trừ: Phím, chuột, máy in Epson Artisan 1430 cần hạ firmware version.
Bước 1.: Tải phần mềm hạ firmware version cho máy in Epson Artisan 1430.
– Tải miễn phí phần mềm hạ firmware version Epson Artisan 1430 cho Windows:
– Tải miễn phí phần mềm hạ firmware version Epson Artisan 1430 cho MAC OS:
– Cài đặt phần mềm, sau đó kiểm tra máy in Epson Artisan 1430 có được hỗ trợ tính năng thay đổi firmware hay không:

– Nếu được hỗ trợ thì chúng ta xem cách vào chế độ Service Mode (Update Mode) cho máy in màu Epson Artisan 1430
Bước 2.: Kết nối máy in Epson Artisan 1430 tới máy tính bằng dây kết nối USB, sau đó nhấn vào Change Firmware để xem cách vào chế độ Service Mode.

– Cách vào chế độ Service Mode:

Bước 3.: Lựa chọn máy in Epson Artisan 1430 để tắt Downgrade Firmware.


Bước 4.: Chọn máy in Epson Artisan 1430 sau đó nhấn Update.

Bước 5.: chọn Yes để tiếp tục.

Bước 6.: Nhập Key Firmware Epson Artisan 1430, sau đó nhấn OK.

Bước 7.: Đợi phần mềm tự động hạ firmware version cho máy in Epson Artisan 1430.

Bước 8.: nhấn OK để hoàn tất quá trình hạ firmware version cho máy in Epson Artisan 1430.

Bước 9.: Kiểm tra firmware máy in Artisan 1430 sau khi hạ version.

Video hướng dẫn hạ version máy in Epson Artisan 1430:

#Key Firmware Epson Artisan 1430
#Epson Artisan 1430 ink cartridge is not recognized
#Epson Artisan 1430 ink cartridges are not recognized
#Epson Artisan 1430 báo đèn đỏ
#Epson Artisan 1430 không in được
#Epson Artisan 1430 không nhận hộp mực
#Epson Artisan 1430 lỗi firmware

Liên Hệ Để Lấy Key Firmware Epson Artisan 1430

Mobile/ Zalo: 0915.589.236 – 0965.806.235
Telegram: https://t.me/nguyendangmien
Skype: nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien

Chúng tôi đảm bảo

– Cung cấp key firmware cho máy in Epson Artisan 1430 chính hãng, nhanh nhất, thuận tiện nhất với giá rẻ nhất Epson Artisan 1430.
– Hỗ trợ cài đặt/hạ firmware version máy in Epson Artisan 1430 cho bạn qua mạng/ tại nhà.
– Hoàn tiền 100% nếu key firmware máy in Epson Artisan 1430 không chạy được hoặc bị lỗi.
– Hãy yên tâm sử dụng phần mềm vì đã có rất nhiều người sử dụng key firmware này.
– Nhóm những người đã sử dụng phần mềm reset máy in Epson Artisan 1430: https://zalo.me/g/ydffvv380

Cách sửa một số lỗi cơ bản cho máy in Artisan 1430

• Code: 01
• Display: A printer error has occurred. Turn off the printer and turn it on again. See your documentation.
• Description: Fatal error (printer mechanism)
• Causes: Mechanical trouble occurred.
• Troubleshooting Guides: 1.Is the CR Motor cable properly connected to CN21 connector on the Main Board? 1.Connect the CR Motor cable correctly to CN21 connector on the Main Board. 2.Is the CR Motor cable damaged? 2.Replace the CR Motor with a new one. 3.Does the CR Motor operate normally? 3.Replace the CR Motor with a new one. 1.Is the CR Encoder damaged? 1.Replace the CR Encoder with a new one. 2.Is the FFC correctly connected to the connector on the CR Encoder? 2.Connect the Head FFC correctly. 1.Is the CR Scale properly centered in the slit of the CR Encoder? 1.Install the CR Scale correctly. 2.Is the CR Scale surface clean? 2.Wipe any dirt off the surface of the CR Scale. When the contamination is severe, replace the CR Scale with a new one. 3.Is the CR Scale damaged? 3.Replace the CR Scale with a new one. 4.Is the CR Scale correctly installed? 4.Install the CR Scale and the torsion spring correctly. 1.Is the Upper Paper Guide correctly installed? 1.Install the Upper Paper Guide correctly. 1.Is the Carriage Shaft free from dirt, and adequately lubricated? 1.Clean the Carriage Shaft and lubricate it as specified. 1.Is the CR Guide Plate free from dirt, and adequately lubricated? 1.Clean the CR Guide Plate and lubricate it as specified. 1.Is the Ink Tube correctly routed? 1.Route the Ink Tube correctly. 1.Is the Head FFC correctly routed? 1.Route the Head FFC correctly. 1.Is the Carriage path contaminated with foreign material (slip of paper)? 1.Remove any foreign material from Carriage path. 1.Is the CR Timing Belt correctly installed to Timing Driven Pulley Assy? 1.Install the Timing Driven Pulley Assy to CR Timing Belt correctly. 2.Is the CR Timing Belt correctly installed to the Pinion Gear of the CR Motor? 2.Install CR Timing Belt correctly. 1.Is tension of the CR Timing Belt appropriate? 1.Reassemble the CR Timing Belt and check the tension of the CR1.Is the PF Motor cable properly connected to CN22 connector on the Main Board? 1.Connect the PF Motor cable correctly to CN22 connector on the Main Board. Timing Belt again. If the tension is still not appropriate, replace the Printer Mechanism. 2.Is the PF Motor cable damaged? 2.Replace the PF Motor with a new one. 3.Does the PF Motor operate normally? 3.Replace the PF Motor with a new one. 1.Check if the firmware is the latest. 1.Update the firmware to the latest. 1.Check if the CR lock lever moves smoothly. 1.Replace the Ink System with a new one.

• Code: 02
• Display: It is likely that a paper jam has occurred in the printer. Turn off the printer, then open the scanner unit and remove the paper. See your documentation.
• Description: Fatal error (paper jam)
• Causes: Mechanical trouble occurred.
• Troubleshooting Guides: 1.Is the CR Motor cable properly connected to CN21 connector on the Main Board? 1.Connect the CR Motor cable correctly to CN21 connector on the Main Board. 2.Is the CR Motor cable damaged? 2.Replace the CR Motor with a new one. 3.Does the CR Motor operate normally? 3.Replace the CR Motor with a new one. 1.Is the CR Encoder damaged? 1.Replace the CR Encoder with a new one. 2.Is the FFC correctly connected to the connector on the CR Encoder? 2.Connect the Head FFC correctly. 1.Is the CR Scale properly centered in the slit of the CR Encoder? 1.Install the CR Scale correctly. 2.Is the CR Scale surface clean? 2.Wipe any dirt off the surface of the CR Scale. When the contamination is severe, replace the CR Scale with a new one. 3.Is the CR Scale damaged? 3.Replace the CR Scale with a new one. 4.Is the CR Scale correctly installed? 4.Install the CR Scale and the torsion spring correctly. 1.Is the Upper Paper Guide correctly installed? 1.Install the Upper Paper Guide correctly. 1.Is the Carriage Shaft free from dirt, and adequately lubricated? 1.Clean the Carriage Shaft and lubricate it as specified. 1.Is the CR Guide Plate free from dirt, and adequately lubricated? 1.Clean the CR Guide Plate and lubricate it as specified. 1.Is the Ink Tube correctly routed? 1.Route the Ink Tube correctly. 1.Is the Head FFC correctly routed? 1.Route the Head FFC correctly. 1.Is the Carriage path contaminated with foreign material (slip of paper)? 1.Remove any foreign material from Carriage path. 1.Is the CR Timing Belt correctly installed to Timing Driven Pulley Assy? 1.Install the Timing Driven Pulley Assy to CR Timing Belt correctly. 2.Is the CR Timing Belt correctly installed to the Pinion Gear of the CR Motor? 2.Install CR Timing Belt correctly. 1.Is tension of the CR Timing Belt appropriate? 1.Reassemble the CR Timing Belt and check the tension of the CR1.Is the PF Motor cable properly connected to CN22 connector on the Main Board? 1.Connect the PF Motor cable correctly to CN22 connector on the Main Board. Timing Belt again. If the tension is still not appropriate, replace the Printer Mechanism. 2.Is the PF Motor cable damaged? 2.Replace the PF Motor with a new one. 3.Does the PF Motor operate normally? 3.Replace the PF Motor with a new one. 1.Check if the firmware is the latest. 1.Update the firmware to the latest. 1.Check if the CR lock lever moves smoothly. 1.Replace the Ink System with a new one.

• Code: 03
• Display: A scanner error has occurred. See your documentation.
• Description: Fatal error (Scanner)
• Causes: Mechanical trouble occurred.
• Troubleshooting Guides: 1.Is the CR Motor cable properly connected to CN21 connector on the Main Board? 1.Connect the CR Motor cable correctly to CN21 connector on the Main Board. 2.Is the CR Motor cable damaged? 2.Replace the CR Motor with a new one. 3.Does the CR Motor operate normally? 3.Replace the CR Motor with a new one. 1.Is the CR Encoder damaged? 1.Replace the CR Encoder with a new one. 2.Is the FFC correctly connected to the connector on the CR Encoder? 2.Connect the Head FFC correctly. 1.Is the CR Scale properly centered in the slit of the CR Encoder? 1.Install the CR Scale correctly. 2.Is the CR Scale surface clean? 2.Wipe any dirt off the surface of the CR Scale. When the contamination is severe, replace the CR Scale with a new one. 3.Is the CR Scale damaged? 3.Replace the CR Scale with a new one. 4.Is the CR Scale correctly installed? 4.Install the CR Scale and the torsion spring correctly. 1.Is the Upper Paper Guide correctly installed? 1.Install the Upper Paper Guide correctly. 1.Is the Carriage Shaft free from dirt, and adequately lubricated? 1.Clean the Carriage Shaft and lubricate it as specified. 1.Is the CR Guide Plate free from dirt, and adequately lubricated? 1.Clean the CR Guide Plate and lubricate it as specified. 1.Is the Ink Tube correctly routed? 1.Route the Ink Tube correctly. 1.Is the Head FFC correctly routed? 1.Route the Head FFC correctly. 1.Is the Carriage path contaminated with foreign material (slip of paper)? 1.Remove any foreign material from Carriage path. 1.Is the CR Timing Belt correctly installed to Timing Driven Pulley Assy? 1.Install the Timing Driven Pulley Assy to CR Timing Belt correctly. 2.Is the CR Timing Belt correctly installed to the Pinion Gear of the CR Motor? 2.Install CR Timing Belt correctly. 1.Is tension of the CR Timing Belt appropriate? 1.Reassemble the CR Timing Belt and check the tension of the CR1.Is the PF Motor cable properly connected to CN22 connector on the Main Board? 1.Connect the PF Motor cable correctly to CN22 connector on the Main Board. Timing Belt again. If the tension is still not appropriate, replace the Printer Mechanism. 2.Is the PF Motor cable damaged? 2.Replace the PF Motor with a new one. 3.Does the PF Motor operate normally? 3.Replace the PF Motor with a new one. 1.Check if the firmware is the latest. 1.Update the firmware to the latest. 1.Check if the CR lock lever moves smoothly. 1.Replace the Ink System with a new one.

• Code: 04
• Display: The printer’s ink pads are at the end of their service life. Please contact Epson support.
• Description: Maintenance request (waste ink over flow)
• Causes: The waste ink counter exceeds to capacity.
• Troubleshooting Guides: 1. Is the Scanner Motor cable properly connected to CN49 connector on the Main Board? 1. Connect the Scanner Motor cable correctly to CN49 connector on the Main Board. 2. Is the coil resistance of the Scanner Motor TBD Ohm Check with the tester. 2. Replace the Scanner Motor cable with a new one. 3. Is the Scanner Motor Cable damaged? 3. Replace the Scanner Motor cable with a new one. 1. Is the Scanner CR Encoder FFC properly connected to CN49 connector on the Main Board? 1. Connect the Scanner CR Encoder FFC correctly to CN49 connector on the Main Board. 2. Is the Scanner CR Encoder FFC damaged? 2. Replace the Scanner CR Encoder FFC with a new one. 1. Is the Scanner Carriage FFC properly connected to CN41 connector on the Main Board? 1. Connect the Scanner Carriage FFC correctly to CN41 connector on the Main Board. 2. Is the Scanner Carriage FFC damaged? 2. Replace the Scanner Carriage FFC with a new one. 1. Is the Scanner Carriage Unit damaged? 1. Replace the Scanner Carriage FFC with a new one.

• Code: 05
• Display: Paper jam. Open the scanner unit. Remove the jammed paper, close the scanner unit, then press the [Start] button.
• Description: Paper jam error
• Causes: Paper remained in the paper path after paper ejection.
• Troubleshooting Guides: Replace Waste Ink Tray Assy or/and Lower Paper Guide Waste Ink Pad Assy and reset the waste ink counter.

• Code: 06
• Display: Multi-page feed error. Remove and reload the paper, then press the [Start] button.
• Description: Double feed error
• Causes: Double feeding occurred during double sided printing.
• Troubleshooting Guides: 1. Is Rear Paper Guide Assy correctly installed? 1. Install the Rear Paper Guide Assy correctly. 1. Is Lower ASF Paper Guide Assy correctly Assy installed? 1. Install the Lower ASF Paper Guide Assy correctly. 2. Is the intermediate roller shaft correctly installed? 2. Install the intermediate roller shaft correctly. 3. Is the surface of intermediate roller contaminated with micro pearl paper dust or greasy dirt? 4. Does the flap of the Lower ASF Paper Guide Assy come off? 4. Install the flap of the Lower ASF Paper Guide correctly. 1. Is LD Roller shaft correctly installed? 1. Install the LD Roller shaft correctly. 2. Is the surface of LD Roller contaminated with micro pearl paper dust or greasy dirt? 2. Clean the LD Roller. 1. Is the Paper Guide Top Assy correctly installed? 1. Install the Paper Guide Top Assy correctly. 1. Is the Upper Paper Guide L/R Assy correctly installed? 1. Install the Upper Paper Guide L/ R Assy correctly. 1. Is the Cassette Cork damaged or worn? 1. Replace the Cassette Cork with a new one. 2. Is the rear end of the Cassette Assy damaged? 2. Replace the Cassette Unit with a new one. 1. Is the Sub Transmission Cam Holder correctly installed? 1. Install the Sub Transmission Cam Holder correctly. 1. Is the Star Wheel Roller Holder disengaged? 1. Install the Star Wheel Holder correctly. 2. Is the EJ Frame Assy correctly installed? 2. Install the EJ Frame Assy correctly. 3. Is there any abnormality on the drive section of EJ Frame Assy? 3. Assemble the EJ Frame Assy correctly. 4. Is the EJ Frame Assy deformed protruding downward? 4. Replace the EJ Frame Assy with a new one. 1. Check if the torsion springs; two kinds securing the Upper Paper Guide L/R Assy, are correctly installed. 1. Install the torsion springs securing the Upper Paper Guide L/R Assy correctly. 2. Check if the attachment direction of the roller of Upper Paper Guide R Assy is correct. 2. Install the roller of Upper Paper Guide R Assy correctly.